SmartACU2000D Smart Array Controller
User Manual (With PID Modules)
Figure 7-11 Removing a faulty power adapter
Step 3 Install a new power adapter.
Step 4 Connect the cables based on their labels.
----End
7.3.9 Replacing the PID Module
Step 1 Open the PID cabinet door and adjust the support bar.
Figure 7-12 Adjusting a support bar
Step 2 Open the maintenance compartment door of the PID module, and remove the
cover from the connection box.
Issue 05 (2023-09-26)
Copyright © Huawei Technologies Co., Ltd.
7 System Maintenance
92