Huawei SmartACU2000D User Manual page 13

SmartACU2000D Smart Array Controller
User Manual (With PID Modules)
●
●
●
●
●
Using Ladders
●
●
●
●
Issue 05 (2023-09-26)
scratching the surface of the equipment or damaging the components and
cables.
When moving a heavy object, be aware of the workbench, slope, staircase,
and slippery places. When moving a heavy object through a door, ensure that
the door is wide enough to move the object and avoid bumping or injury.
When transferring a heavy object, move your feet instead of turning your
waist around. When lifting and transferring a heavy object, ensure that your
feet point to the target direction of movement.
When transporting the equipment using a pallet truck or forklift, ensure that
the tynes are properly positioned so that the equipment does not topple.
Before moving the equipment, secure it to the pallet truck or forklift using
ropes. When moving the equipment, assign dedicated personnel to take care
of it.
Choose sea or roads in good conditions for transportation. Do not transport
the equipment by railway or air. Avoid tilt or jolt during transportation.
Ensure that tilt angle of the cabinet meets the requirements shown in the
figure. The tilt angle α of a cabinet with packaging must be less than or equal
to 15°. After the cabinet is unpacked, its tilt angle α must be less than or
equal to 10°.
Use wooden or insulated ladders when you need to perform live-line working
at heights.
Platform ladders with protective rails are preferred. Do not use single ladders.
Before using a ladder, check that it is intact and confirm its load bearing
capacity. Do not overload it.
Ensure that the ladder is securely positioned and held firm.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
6