SmartACU2000D Smart Array Controller
User Manual (With PID Modules)
No.
Name
18
RS485 communications
terminal (JX01)
19
SmartPID module (PID01) SmartPID2000
20
AC input terminal of the
24 V power module
(JX02)
2.5 Working Principles
Figure 2-7 Schematic diagram (The components in dotted boxes are optional.
Either a PoE module or a switch can be configured.)
The SACU communicates with devices in a PV array over RS485, MBUS, or
Ethernet.
●
Issue 05 (2023-09-26)
Specifications
12P; supports the wires with a cross-
sectional area of 1–2.5 mm
AWG).
220 V/2P; supports the wires with a cross-
sectional area of 0.2–10 mm
AWG).
NO TE
When the SACU communicates with the inverter over MBUS, log in to the embedded
WebUI of the SmartLogger3000, choose Monitoring > MBUS > Network Settings, and set
Networking to Enable (default value). When the SACU communicates with the inverters
over RS485, set Networking to Disable. For details, see the
Manual .
RS485 communication mode
Copyright © Huawei Technologies Co., Ltd.
Quantity
1
2
(or 18–14
1
1
2
(or 24–8
SmartLogger3000 User
2 Overview
26