Replacing The Usb Port - Huawei SmartACU2000D User Manual

SmartACU2000D Smart Array Controller
User Manual (With PID Modules)
Step 3 Install a new fiber adapter.
Step 4 Connect the cables based on their labels.
----End

7.3.12 Replacing the USB Port

Step 1 Disconnect the cable from the USB port and label the cable.
Step 2 Remove the faulty USB port.
Figure 7-17 Removing a USB port
Step 3 Install a new USB port. Ensure that the rubber ring is on the inner side of the
cabinet.
Step 4 Connect the cables based on their labels.
----End
Issue 05 (2023-09-26) Copyright © Huawei Technologies Co., Ltd.
7 System Maintenance
96