Optional) Installing The Poe Spd - Huawei SmartACU2000D User Manual

SmartACU2000D Smart Array Controller
User Manual (With PID Modules)
Figure 4-13 Installing a PoE module
----End

4.6.6 (Optional) Installing the PoE SPD

Step 1 Loosen the nuts (do not remove the nuts) on the PoE SPD mounting board.
Step 2 Replace and secure the PoE SPD mounting bracket.
Step 3 Connect one end of the ground cable to the PE point on the PoE SPD, and secure
the ground nut.
Step 4 Place the PoE SPD in the mounting bracket. Ensure that the PE point faces
upwards and the surface marked PE faces outwards.
Step 5 Secure the PoE SPD fastener.
Step 6 Connect the other end of the ground cable to the PE bar.
Issue 05 (2023-09-26) Copyright © Huawei Technologies Co., Ltd.
4 System Installation
51