Optional) Installing The 24 V Power Module - Huawei SmartACU2000D User Manual

SmartACU2000D Smart Array Controller
User Manual (With PID Modules)
Figure 4-11 Connecting cables to an Ethernet switch
----End

4.6.4 (Optional) Installing the 24 V Power Module

Step 1 Remove the mounting bracket of the 24 V power module from the cabinet.
Step 2 Install the 24 V power module in the mounting bracket.
Step 3 Secure the 24 V power module to the mounting bracket using the screws
(delivered with the 24 V power module).
Step 4 Install the 24 V power module in the cabinet.
Step 5 Connect the AC input power cables (delivered with the SACU) to the 24 V power
module based on the cable label.
Issue 05 (2023-09-26) Copyright © Huawei Technologies Co., Ltd.
4 System Installation
49