Huawei SmartACU2000D User Manual page 79

SmartACU2000D Smart Array Controller
User Manual (With PID Modules)
Figure 5-20 Wiring sequence of an RJ45 connector
(1) White-and-orange (2) Orange
(5) White-and-blue
Step 2 Connect the peripheral network cable to the FE2 port on the switch.
Step 3 Bind the network cable.
Figure 5-21 Connecting a network cable
----End
Issue 05 (2023-09-26)
(6) Green
NO TE
Verify that the network cable functions properly using a network cable tester.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
(3) White-and-green
(7) White-and-brown
(4) Blue
(8) Brown
72