Power Module - Huawei ECC800-Pro User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Function
Description
WLAN enabling
Restoring the
default IP
address, factory
settings, and
user information

3.1.3 Power Module

Indicator
Table 3-16 PSU indicator description
Indicator
Issue 02 (2020-09-07)
Operation Description
In wireless network (802.15.4)
pairing mode, press and hold down
the button for 3s to 5s to exit the
pairing mode; or the system
automatically exits the pairing mode
after 30 minutes without pressing
the button.
Press and hold down the button for
more than 8s to clear network
parameters.
Press the button for less than 3s to
enable WLAN.
Press and hold down the button for
1 minute.
Color Name
Green Power
indicato
r
Copyright © Huawei Technologies Co., Ltd.
Status Description
Steady on The converter has a power
input.
Off The converter has no power
input or is faulty.
Blinking at The converter is being queried
long intervals (the indicator blinks at 0.5 Hz,
on for 1s and then off for 1s).
Blinking at The converter application
short program is being loaded (the
intervals indicator blinks at 4 Hz, on for
0.125s and then off for 0.125s).
3 Device Description
Indicator Status
The RF_Z indicator is
blinking at long
intervals.
The RF_Z indicator is
steady on.
None
None
23