Table 1-4 Power Cord And Plug Identification - Hitachi HF-W6500 Instruction Manual

Input rating Plug configuration
100V - 120V
North America
125V
North America
200V - 240V
North America
Universal Euro
UK
Australia
220V – 250V
中华人民共和国
< NOTE >
• As an option, this equipment offers a cable clamp to be used for attaching the
power cord to the equipment. Use that cable clamp as required.
• If you use a power cord clamp for preventing accidental disconnection, add an
extra length to the power cord around the connector when you secure the cord,
in order to allow the cord to be disconnected in an emergency. Alternatively,
install an emergency circuit breaker at the outlet side.

Table 1-4 Power Cord and Plug Identification

Reference
standards
1 ANSI C73.11
2 NEMA 5-15P
3 IEC 83
1 ANSI C73.11
2 NEMA 5-15P
3 IEC C13
1 ANSI C73.11
2 NEMA 6-15P
3 IEC 83
4 CEE (7)
II, IV, VII
3 IEC 83
5 BS 1365
3 IEC 83
6 AS C112
7 GB/T 5023.5
GB 1002,
GB 2099.1
GB 17465.1
GB 15934
Cord and connector
a b
a=7±0.05 mm
b=7±0.05 mm
c=15.8 mm
23 mm
1-23
1. GETTING STARTED
c
Three-wire power cord
with a two-pole three-
terminal grounding-type
connector.
电源线请务必使用带
接地相的3相插头。