Table of Contents
Advertisement
3. DISPLAY SCREEN
<Specifications>
・Before you set up the screen, terminate all running application software.
・When you change connections to switch between single- and multi- display
configurations, turn off the power to the equipment, change the connection of display
cables, turn the power back on, and then set up the screen configuration.
・When you change the connection configuration for the displays, reconfigure the screen
settings accordingly.
・Depending on application software, the screen may flicker and video playback may not be
smooth.
・If a display (monitor) connected to DisplayPort is turned off, the display might not be
detected. In this situation, if you perform the following procedure, the system will detect
the display.
1. Shut down the OS of the equipment, and then disconnect the power-cord plug from
the outlet.
2. Turn off the display, and then disconnect the power-cord plug from the outlet.
3. Wait for a minute or longer, connect the power-cord plugs of the equipment and the
display to the outlets, and then start the equipment and the display.
・DisplayPort audio output is not supported.
(The display image assumes Windows® 10 but it is similar under other OS.)
C-7
Advertisement
Table of Contents
