Checking The Status Of The Raid1; Checking By The Status Lamps; Figure 10-1 Hdd Status Lamp - Hitachi HF-W6500 Instruction Manual

10. RAID1

10.3 Checking the Status of the RAID1

10.3.1 Checking by the Status Lamps

This equipment has drive status lamps (an HDD1／SSD1 status lamp and an HDD2／SSD2
status lamp) as shown in the figure below. This page shows an example of the B model. For
the T model, replace "HDD" with "SSD".
Correspondence between HDD status lamps
Lamp name
HDD1 STATUS
HDD2 STATUS
Meaning of the HDD status lamps
HDD status
Lamp status (Red)
OFF (Both)
ON (Either one)
Flashing
(Either one)
Flashing
(Both)
and drive bays
Corresponding drive bay number
1
2
drive
Status of the
drive
Both s are working properly.
drive
One has an error.
drive
(The power of the
error is OFF.)
Rebuild (copy) is ongoing.
(Only the lamp of the copy
drive
destination flashes.)
drive
Both s have errors.

Figure 10-1 HDD status lamp

s
with an
10-4
Drive bay 2
Drive bay 1
Power switch
Digital LED for
Status indication
Status lamp
Alarm lamp
Drive access lamp
Standby lamp
HDD2 status lamp
HDD1 status lamp
Reset switch