Table 5-2 Individual Specifications List - Hitachi HF-W6500 Instruction Manual

(2) Individual specifications
Item
Model
(*1)
HDD／SSD
Drive bay 1
Built-in file HDD／SSD
device (*2) (*3) Drive bay2
HDD／SSD
Drive bay3
Weight
(*1) The "xx" denotes the OS type. For details about OS types, see " (3) Pre-installed OS model
specifications".
If "xx" is "NO", an OS is not installed.
Depending on the standards compliance, "y" is either "J" (for Japanese specification) or "M"
(for International specification).
The alphabet at the end denotes the model:
The letter at the end denotes the model: A: A model (SATA HDD single), B: B model
(SATA HDD software RAID1 hot swap model), S: S model (SATA SSD single),
T: T model (SATA SSD software RAID1 hot swap model)
(*2) For information about the precautions for hard disks, see "PRECAUTION 4. HARD DISK
DRIVES (HDDs)／SOLID STATE DRIVES(SSDs)".
(*3) The HDD1 and HDD2 for the B model, and the SSD1 and SSD2 for the T model must have the
same capacity. Do not install drives with different capacities.
(*4) This product is not applicable because it is a computer product for embedded use.

Table 5-2 Individual specifications list

A model : HJ-6560-xxyA
B model : HJ-6560-xxyB
SATA HDD 1TB or 2TB
SATA HDD 1TB or 2TB
(B model : Required option
A model : Option)
SATA HDD 1TB or 2TB
(Option)
About 13.3 kg
5-3
Specifications
HF-W6500 model 60
S model : HJ-6560-xxyS
T model : HJ-6560-xxyT
SATA SSD 480GB
SATA SSD 480GB
(T model : Required option
S model : Option)
SATA SSD 480GB
About 11.5 kg
5. SPECIFICATION
(Option)