Front View (Without Front Bezel) - NEC Express5800 Series User Manual

Chapter 1 General Description
4.2

Front View (Without Front Bezel)

・Front panel LEDS and Power Switch (Common)
(1) UID switch/LED
A switch for turning on/off for UID LED and iLO reset.
This LED turns on when UID switch is pressed. Then press again, LED turns off.
When iLO makes it reset by pressing UID switch, refer to iLO 5 User Guide
Commands from the software. iLO's remote management or performing firmware update, iLO reset by
pressing UID switch cause it to turn on or flash.
(2) STATUS LED
LEDs for showing the server status.
(3) LINK/ACT LED
LEDs for showing the status of accessing to the network.
(4) POWER Switch/LED
A switch for turning on/off the server. Press once to turn on the serve. POWER LED lights when it is
on. Press it again to turn off the server. Hold down the switch for four seconds or more to forcibly turn
off the server.
26
Express5800/R120h-2E User's Guide
4. Names and Functions of Parts