Front View (Without Front Bezel) - NEC Express5800 Series User Manual

Chapter 1 General Description
4.2

Front View (without Front Bezel)

The illustration below shows the server with optional optical disk drive and 2.5-inch HDD cage are installed.
(12) (15) (14) (13)
(9) Drive Bay
Bays for installing the optional HDD cage. The following
optional cage can be installed:
– 2.5-inch HDD cage: Up to 3
– 3.5-inch HDD cage: Up to 2
Dummy trays are installed in all vacant slots of 2.5-inch
HDD cage or 3.5-inch HDD cage in standard configuration.
* The illustration shows one 2.5-inch HDD cage is installed.
(10) Optical Disk Drive
An optical disk drive for reading CD/DVD. Either of the
following drive can be installed:
– Slim DVD-ROM drive
– Slim DVD Super MULTI drive
The drive provides the following: an eject button to eject the
tray; an LED that indicates a CD/DVD access; and an eject
hole for forcibly ejecting the tray
See 4.1 Front View.
(9)
(11) 5.25-inch Expansion Bay
(12) USB Connectors (front)
(13) DUMP Switch (NMI)
(14) RESET Switch
(15) BMC RESET Switch
Express5800/T120g User's Guide
Expansion bay Expansion bay
#1 #2
Bays for installing the optional DAT drive, and other
5.25-inch devices. The bay is equipped with Blank Covers
as standard.
Connectors for connecting USB interface devices.
A switch for collecting the memory dump.
A switch for resetting the server.
A switch for resetting BMC of this server. Use the switch
only when there is something wrong with
EXPRESSSCOPE Engine 3 (BMC).
To use this switch, press it at least five seconds. The
remote management feature is disabled for about 40
seconds after BMC is reset.
4. Names and Functions of Parts
(11)
(10)
25