Vmware Esxi Usb Flash Memory For Installation (N8106-016/017); Installation Of Usb Flash Memory N8106-016/017 - NEC Express5800/R120h-2M User Manual

Chapter 2 Preparations
1.19
VMware ESXi USB flash memory for installation
(N8106-016/017)
VMware ESXi USB flash memory for installation (N8106-016/017) can be connected to USB 3.0 connector inside
the device.
Two types of USB flash memory are prepared.
①
N8106-016 2x8GB microSD card installing kit (USB)
Two microSDs able to install and boot VMware ESXi and USB conversion kit
②
N8106-017 8GB USB memory
USB flash memory able to install and boot VMware ESXi

Notes

N8106-016 2x8GB microSD card installing kit (USB) is equipped with RAID1 function.

The function cannot be installed with M.2 SATA SSD.

This product does not include an install media of ESXi and the license.

Installation of USB flash memory N8106-016/017

When installing the components, follow the steps below.
1. See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2. Confirm the position of USB 3.0 connector inside.
118
Note In order to prevent the damage for the electronic parts, start the installation of
system after providing proper anti-static treatment. If a proper earth is not
provided, electrostatic discharge may occur.
Express5800/R120h-2M User's Guide
1. Installing Internal Optional Devices