HPE Apollo 4200 Gen10 Plus Maintenance And Service Manual page 46

CAUTION: To prevent damage to electrical components, take the appropriate anti-static precautions before beginning CAUTION:
any installation, removal, or replacement procedure. Improper grounding can cause electrostatic discharge.
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have the components included with the hardware kit.
Procedure Procedure
1. Power down the server.
2. Remove the server from the rack .
3. Place the server on a flat, level surface.
4. Remove the complete access panel .
5. Disconnect all cables connected to the storage controller.
6. Remove the storage controller.
7. Configure the new storage controller.
For more information, see the user guide for your controller series on the Hewlett Packard Enterprise website (
http://www.hpe.com/info/smartstorage-docs). http://www.hpe.com/info/smartstorage-docs
To replace the component, reverse the removal procedure.
Removing and replacing the HPE Removing and replacing the
Removing and replacing the boot device Removing and replacing the
Prerequisites Prerequisites
Procedure Procedure
1. Observe the following alerts:
CAUTION: CAUTION:
HPE NS204i-p NVMe OS Boot Device NS204i-p NVMe OS Boot Device option
boot device
HPE Apollo 4200 Gen10 Plus Server Maintenance and Service Guide
option
46