Removing And Replacing A Rear Drive Cage - HPE Apollo 4200 Gen10 Plus Maintenance And Service Manual

7. Remove drive cage 3.
To replace the component, reverse the removal procedure.

Removing and replacing a rear drive cage

Removing and replacing a rear drive cage
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components WARNING:
to cool before touching them.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static precautions before beginning CAUTION:
any installation, removal, or replacement procedure. Improper grounding can cause electrostatic discharge.
Procedure Procedure
1. Power down the server.
2. Remove the server from the rack .
3. Place the server on a flat, level surface.
4. Remove the complete access panel .
5. Remove the rear drive cage.
HPE Apollo 4200 Gen10 Plus Server Maintenance and Service Guide 32