Drive Cage Numbering - HPE Apollo 4200 Gen10 Plus Maintenance And Service Manual

to their manufacturing defaults.
3
When the system maintenance switch position 6 is set to the On position and Secure Boot is enabled, some configurations cannot be
restored. For more information, see Secure Boot.
Disabling the HPE Disabling the HPE SR100i Gen10 Plus Software RAID SR100i Gen10 Plus Software RAID
Before changing the boot mode to Legacy BIOS Mode, you must first disable the HPE SR100i Gen10 Plus Software RAID.
NOTE: NOTE:
When you use the software to update, maintain, or monitor the HPE Apollo 4200 Gen10 Plus server, you will see HPE
ProLiant XL420 Gen10 Plus Server as the product name in the interface. ProLiant XL420 Gen10 Plus Server
Procedure Procedure
1. Reboot the server.
The server restarts and the POST screen appears.
2. Press F9 F9.
The System Utilities screen appears.
3. Select System Configuration > BIOS/Platform Configuration (RBSU) > System Options > Storage Options > SATA Controller
options, and then press Enter Enter.
4. Select HPE HPE Smart Array SW RAID Support Smart Array SW RAID Support , and then choose Disable
5. To save the selection, press F10
6. To save the changes, press Yes-Save Changes
7. To exit, press F12: Save and Exit F12: Save and Exit .
The server continues the normal boot process.
For more information, see the product QuickSpecs on the Hewlett Packard Enterprise website (https://www.hpe.com/info/qs

Drive cage numbering

Drive cage numbering
F10.
Yes-Save Changes.
Disable from the drop-down menu.
HPE Apollo 4200 Gen10 Plus Server Maintenance and Service Guide
HPE
https://www.hpe.com/info/qs).
64