Security Menu; Set Date And Time Menu - Develop ineo 3301P User Manual

Security menu

Set Date and Time menu

Use
Current Date and Time
Manually Set Date and Time
[input date/time]
Time Zone
[list of time zones]
Automatically observe DST
On
Off
Enable NTP
On
Off
User's Guide
To
View the current date and time settings for the printer.
Note: The date and time are set in YYYY-MM-DD HH:MM format.
Enter the date and time.
Note: Setting the date and time using this menu automatically sets Enable NTP
to Off.
Select the time zone.
Note: GMT is the factory default setting.
Set the printer to use the applicable daylight saving time (DST) start and end
times associated with the printer Time Zone setting.
Note: On is the factory default setting.
Enable Network Time Protocol, which synchronizes the clocks of devices on a
network.
Notes:
• On is the factory default setting.
• Enable NTP is automatically set to Off if you manually set the date and
time.
- 97 -