Table of Contents
Advertisement
Configuring a custom paper type
Using the Embedded Web Server
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
-
Print a network setup page or menu settings page, and then locate the IP address in TCP/IP
section. The IP address appears as four sets of numbers separated by periods, such as
123.123.123.123.
-
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Settings >Paper Menu >Custom Types.
3. Select a custom paper type name, and then select a custom paper type.
Note: Plain Paper is the factory default paper type for all user-defined custom names.
4. Click Submit.
Using the printer settings on the computer
Depending on your operating system, access the Custom menu using the Local Printer Settings Utility or
Printer Settings.
Assigning a custom paper type
Using the Embedded Web Server
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
-
Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP
section. The IP address appears as four sets of numbers separated by periods, such as
123.123.123.123.
-
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Settings >Paper Menu.
3. From the Tray Configuration section, select a paper source, and then select a custom paper type
under the paper type column.
4. Click Submit.
Using the printer settings on the computer
Depending on your operating system, access the Paper menu using the Local Printer Settings Utility or
Printer Settings.
User's Guide
- 47 -
Advertisement
Table of Contents
