Table of Contents
Advertisement
14—Troubleshooting
Understanding the printer messages
Bin full. Remove paper.
Remove the paper stack from the standard bin.
Cannot collate large document [37]
Try one or more of the following:
•
From the printer control panel, press
collating the rest of the print job.
•
Cancel the current print job.
Cannot defrag flash memory [37]
Try one or more of the following:
•
From the printer control panel, press
•
Delete fonts, macros, and other data in the printer memory. From the printer control panel, navigate
to:
>Settings >
>Yes >
•
Install additional printer memory.
Change [paper source] to [custom string]. Load [orientation].
Try one or more of the following:
•
Load the correct size and type of paper in the tray, and then press
Note: Make sure the paper size and type settings are specified in the Paper menu on the control
panel.
•
Select Use current [paper source] on the control panel to clear the message and continue printing
using the current size and type of paper in the tray.
•
Cancel the print job.
User's Guide
to print the portion of the job already stored and begin
to stop the defragmentation and continue printing.
>Print Settings >
- 138 -
>Utilities Menu >
>Format Flash >
on the control panel.
Advertisement
Table of Contents
Need help?
Do you have a question about the ineo 3301P and is the answer not in the manual?
Questions and answers