Security Menu; Set Date And Time Menu - Develop ineo 3300P User Manual

Security menu

Set Date and Time menu

Use
Current Date and Time
Manually Set Date and Time
[input date/time]
Time Zone
[list of time zones]
Automatically observe DST
On
Off
UTC (GMT) Offset
[input time in minutes]
DST Start
[list of weeks]
[list of days]
[list of months]
[input time]
DST End
[list of weeks]
[list of days]
[list of months]
[input time]
DST Offset
[input time in minutes]
User's Guide
To
View the current date and time settings for the printer.
Enter the date and time.
Note: Setting the date and time using this menu automatically sets Enable NTP
to No.
Select the time zone.
Note: GMT is the factory default setting.
Set the printer to use the applicable daylight saving time (DST) start and end
times associated with the printer Time Zone setting.
Note: On is the factory default setting.
Set the time offset from Coordinated Universal Time or Greenwich Mean Time.
Note: The setting applies only if you select "(UTC+user) Custom" as the time
zone.
Set the DST start time.
Note: The setting applies only if you select "(UTC+user) Custom" as the time
zone.
Set DST end time.
Note: The setting applies only if you select "(UTC+user) Custom" as the time
zone.
Set the DST offset time.
Note: The setting applies only if you select "(UTC+user) Custom" as the time
zone.
- 86 -