Connecting The Printer To A Wireless Network Using Wi-Fi Protected Setup; Connecting The Printer To A Wireless Network Using The Printer Software - Develop ineo 3301P User Manual

Connecting the printer to a wireless network using Wi-Fi Protected Setup

Before connecting the printer to a wireless network, make sure that:
• The access point (wireless router) is Wi-Fi Protected Setup (WPS) certified or WPS-compatible. For
more information, see the documentation that came with your access point.
• A wireless network adapter installed in your printer is attached and working properly. For more
information, see the instruction sheet that came with the wireless network adapter.
Using the Push Button Configuration method
1. From the printer control panel, navigate to:
>Network/Ports >
Wireless Connection Setup >
>
2. Follow the instructions on the printer display.
Using the Personal Identification Number (PIN) method
1. From the printer control panel, navigate to:
>Network/Ports >
Wireless Connection Setup >
2. Copy the eight-digit WPS PIN.
3. Open a Web browser, and then type the IP address of your access point in the address field.
Notes:
- The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
- If you are using a proxy server, then temporarily disable it to load the Web page correctly.
4. Access the WPS settings. For more information, see the documentation that came with your access
point.
5. Enter the eight-digit PIN, and then save the setting.

Connecting the printer to a wireless network using the printer software

Notes:
• Make sure that the printer is turned on.
• Make sure that a wireless network adapter is installed in your printer and working properly. For
information, see the instruction sheet that came with the adapter.
User's Guide
>Network [x] > >Net [x] Setup >
>Wi-Fi Protected Setup >
>Network [x] > >Net [x] Setup >
>Wi-Fi Protected Setup >
- 29 -
>Wireless >
>Start Push Button Method
>Wireless >
>Start PIN Method >
>
>