-
Have postage stamps attached
-
Have any exposed adhesive when the flap is in the sealed or closed position
-
Have bent corners
-
Have rough, cockle, or laid finishes
•
Adjust the width guides to fit the width of the envelopes.
Note: A combination of high humidity (over 60%) and high printing temperature may wrinkle or seal
envelopes.
Tips on using labels
Print samples on the labels being considered for use before buying large quantities.
Note: Use only paper label sheets. Vinyl, pharmacy, and two-sided labels are not supported.
When printing on labels:
•
Use labels designed specifically for laser printers. Check with the manufacturer or vendor to verify
that:
-
The labels can withstand temperatures up to 240°C (464°F) without sealing, excessive curling,
wrinkling, or releasing hazardous emissions.
-
Label adhesives, face sheet (printable stock), and topcoats can withstand up to 172-kPa (25-psi)
pressure without delaminating, oozing around the edges, or releasing hazardous fumes.
•
Do not use labels with slick backing material.
•
Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam.
Partial sheets also contaminate the printer and the cartridge with adhesive, and could void the printer
and toner cartridge warranties.
•
Do not use labels with exposed adhesive.
•
Do not print within 1 mm (0.04 inch) of the edge of the label, of the perforations, or between die-cuts
of the label.
•
Make sure the adhesive backing does not reach to the edge of the sheet. Zone coating of the
adhesive should be at least 1 mm (0.04 inch) away from edges. Adhesive material contaminates the
printer and could void the warranty.
•
If zone coating of the adhesive is not possible, then remove a 2-mm (0.08-inch) strip on the leading
and driver edge, and then use a non-oozing adhesive.
•
Portrait orientation is recommended, especially when printing bar codes.
Tips on using letterhead
•
Use letterhead designed specifically for laser printers.
•
Print samples on the letterhead being considered for use before buying large quantities.
User's Guide
- 52 -
Need help?
Do you have a question about the ineo 3301P and is the answer not in the manual?
Questions and answers