Utilities menu
Use
Format Flash
Yes
No
Activate Hex Trace
Coverage Estimator
Off
On
User's Guide
To
Format the flash memory.
Warning—Potential Damage: Do not turn off the printer while the flash
memory is being formatted.
Notes:
•
Flash memory refers to the memory added by installing a flash memory
card in the printer.
•
Yes deletes all data stored in the flash memory.
•
No cancels the format request.
•
The flash memory option card must not be read/write- or write-protected.
•
This menu item appears only when a non-defective flash memory card is
installed.
Isolate the source of a print job problem.
Notes:
•
When activated, all data sent to the printer is printed in hexadecimal and
character representation, and control codes are not executed.
•
To exit or deactivate Hex Trace, restart the printer.
Provide an estimate of the percentage coverage of toner on a page. The
estimate is printed on a separate page at the end of each print job.
Note: Off is the factory default setting.
- 113 -