Ipv6 Menu - Develop ineo 3301P User Manual

IPv6 menu

To access the menu, navigate to any of the following:
• Network/Ports >Standard Network >Standard Network Setup >IPv6
• Network/Ports >Network [x] >Network [x] Setup >IPv6
Note: This menu is available only in network printers or printers connected to print servers.
Use
Enable IPv6
On
Off
Auto Configuration
On
Off
Set Hostname
View Address
View Router Address
Enable DHCPv6
On
Off
User's Guide
To
Enable Internet Protocol Version Six (IPv6) in the printer.
IPv6 uses bigger numbers to create IP addresses.
Note: On is the factory default setting.
Specify whether or not the network adapter accepts the automatic
IPv6 address configuration entries provided by a router.
Note: On is the factory default setting.
Set the host name.
Note: The host name is limited to 15 characters, and accepts US-
ASCII, alphanumeric characters and hyphen only.
View the current IPv6 addresses.
View the current router address.
Enable DHCPv6 in the printer.
Note: On is the factory default setting.
- 89 -