Develop ineo 3301P User Manual page 105

Finishing menu
Use
Sides (Duplex)
1 sided
2 sided
Duplex Binding
Long Edge
Short Edge
Copies
1–999
Blank Pages
Do Not Print
Print
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
User's Guide
To
Specify whether two-sided (duplex) printing is set as the default for all print jobs.
Notes:
• "1 sided" is the factory default setting.
• You can set two-sided printing from the software program.
For Windows users:
Click File >Print.
1.
2. Click Properties, Preferences, Options, or Setup.
For Macintosh users:
1. Choose File >Print.
2. Adjust the settings from the print dialog and pop-up menus.
Define the way two-sided pages are bound and printed.
Notes:
• Long Edge is the factory default setting. Long Edge binds pages along their
long edge (left edge for portrait and top edge for landscape).
• Short Edge binds pages along their short edge (top edge for portrait and
left edge for landscape).
Specify the default number of copies for each print job.
Note: 1 is the factory default setting.
Specify whether to insert blank pages in a print job.
Note: Do Not Print is the factory default setting.
Stack the pages of a print job in sequence when printing multiple copies.
Note: "(1,2,3) (1,2,3)" is the factory default setting.
- 105 -