Network/Ports Menu; Active Nic Menu; Standard Network Or Network [X] Menu - Develop ineo 3301P User Manual

Network/Ports menu

The menus in this section only appear in network printers or printers connected to print servers.

Active NIC menu

Use
Active NIC
Auto
[list of available network cards]

Standard Network or Network [x] menu

Note: Only active ports appear in this menu. All inactive ports are omitted.
Use
Energy Efficient Ethernet
Enable
Disable
PCL SmartSwitch
On
Off
PS SmartSwitch
On
Off
User's Guide
To
Notes:
• Auto is the factory default setting.
• This menu item appears only when an optional network card is installed.
To
Set the printer Ethernet connection to a energy-saving mode.
Note: Enable is the factory default setting.
Set the printer to automatically switch to PCL emulation when a print job
requires it, regardless of the default printer language.
Notes:
• On is the factory default setting.
• If PCL SmartSwitch is disabled, then the printer does not examine
incoming data and it uses the default printer language specified in the
Setup menu.
Set the printer to automatically switch to PS emulation when a print job requires
it, regardless of the default printer language.
Notes:
• On is the factory default setting.
• If PS SmartSwitch is disabled, then the printer does not examine incoming
data and it uses the default printer language specified in the Setup menu.
- 83 -