Time Settings - Strong SRT 6005 User Manual

Digital satellite receiver

Hide thumbs Also See for SRT 6005:

Table of Contents

PART 1 English

5.3.1.3 Time Settings

If a broadcaster provides GMT, you can set the time using GMT, or set your own time by yourself. If the

GMT usage is ON then the Current time is set automatically or you can set the time zone. If your

broadcaster provides the correct time offset then your receiver will change from summertime to winter-

time automatically.

If you set GMT Usage to OFF, Set Data and Set Time item are displayed.

To set the time value manually, move the cursor to the time item and use the numeric buttons on the

remote control.

SCREEN 36

5.3.1.4 Set Factory Default

Please be careful when using this function, because it will erase all the data and parameters you may

have set earlier to your receiver. Once you set the factory default you will have to re-install your preferences

and re-scan your channels. To reset your receiver to factory default, apply the following steps:

Select Set Factory default and press OK. The warning message will appear as below.

Table of Contents