Table of Contents
Advertisement
User's Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P
8.7.2 Storage Management
① Storage (ICA-M3580P/ICA-M4580P only)
In the main interface, click "Configuration → Storage → Storage Management → Storage" to
enter the storage management setting interface, where you can view the memory card capacity
and status, and perform operations such as formatting and configuring the memory card, as
shown in Figure 8-47 below.
Figure 8-47
SD card format steps are as follows：
Step 1: Select the disk to be formatted, click "Format".
Step 2: Click "OK".
Step 3: Wait for the format to complete the progress bar, formatting is complete, check the card
information, Total Capacity = Residual Capacity, formatted successfully.
The steps to configure disk quota are as follows:
Step 1: Select the memory card.
Step 2: Set the disk quota, including parameters such as picture capacity and video capacity.
Step 3: Click "Save".
Step 4: Click "Format → OK" to complete the configuration of disk quota after formatting.
② Cloud Storage
Set up cloud storage. When the device triggers an alarm, you can store the alarm picture taken
by the device on a cloud server.
Prerequisites
1) You need to have a Google cloud storage account.
2) To use this function, the device must be connected to the external network, otherwise it will
not work properly.
87
Advertisement
Table of Contents
