Table of Contents
Advertisement
User's Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P
【Time Zone】Displays the current device selection time zone.
【NTP】The IP Camera time will synchronize with network, and you can change the different
time zones. (This feature requires IP Camera network environment to be connected to the
Internet.) Click on the "Apply" after completing the settings.
【SMTP Sever】SMTP server address, including "time.windows.com", "time.nist.gov",
"time-nw.nist.gov", "time-a.nist.gov", "time-b.nist.gov" Optionally, you can also enter the SMTP
server address through "Custom".
【Time interval】The time interval between the IP Camera and the SNTP server is 1 minute by
default. You can set "1 ~ 10080".
【Set Manually/Time Settings】 Enable and set the IP Camera date and time manually, click on
the "Apply" after completing the settings.
【Time in Camera】Displays the current time of the device.
【Synchronize with Computer time】The IP Camera will synchronize with the computer time
and date that you connect currently. Click on the "Apply" after completing the settings.
【Prohibit NVR to modify IPC time】The IP Camera time will not be affected by the backend
storage devices (such as NVR, etc.) after checking this option. The IP Camera time will run
according to the user settings.
② DST
Daylight saving time (DST) refers to the system of artificially stipulating local time for energy
conservation. The unified time used during the implementation of this system is called "DST". In
the System Configuration interface, click "DST" to enter the daylight saving time setting
interface, where you can enable daylight saving time, set daylight saving time, end time and
end time, as shown in Figure 8-3:
Figure 8-3
33
Advertisement
Table of Contents
