Table of Contents
Advertisement
User's Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P
8.3.3 Email
After setting the email information and enabling the alarm linkage email function, and when the
IPC triggers an alarm, the system sends an alarm email to the user mailbox.
The specific operation steps are as follows:
Step 1: In the main interface, click "Config Network Email" to enter the email settings
interface, as shown in Figure 8-8.
Figure 8-8
Step 2: Configure Sender's Address, SMTP Server, Port, Upload Via SMTP, Encryption Type,
User Name, Password, and Recipient's Address.
Step 3: Click "Test" to confirm whether the network connection and SMTP configuration are
correct.
Step 4: Click "Apply" to save the configuration.
Sender
【Sender】Fill in the full address of the sender mailbox.
【SMTP Server】Fill in your email server address.
【Port】Fill in your email server port.
【Upload Via SMTP】In the drop-down menu, select SMTP file format, JPEG image format,
AVI video and message for selection.
【My Server Requires Authentication】When enabled, the server and user are authenticated
to ensure that the data is sent to the correct client and server.
【User Name】Fill in the send mailbox user name.
【Password】Fill in the send mailbox password.
【Confirm Password】Fill in the send mailbox password.
Receiver
【Email 1, 2, 3】Fill in the full address of your inbox, here up to 3 inboxes, click on the
completion of the completion of the "Test" to ensure that all the correctness of the input
information and network connectivity of the camera.
49
Advertisement
Table of Contents
