Planet ICA-3480 User Manual page 43

User's Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P
【FTP Server】Fill in the FTP server address.
【Test】Enter the FTP server information and click "Test" to confirm the correctness of all input
information and whether the device and server are connected properly.
【Port】Fill in the FTP server port number.
【User Name】Fill in the FTP server username.
【Password】Fill in the FTP server password.
【Confirm Password】Fill in the FTP server password.
【Storage first level directory】Automatically create a level-1 directory under the FTP storage
path.
【Storage secondary directory】Create a secondary directory under the FTP primary
directory.
【Auto Cover】 When enabled, the oldest FTP server will be overwritten automatically when the
FTP server is full.
⑤ Other
In the main interface, click "Config  Network  Basic Setup  Other" to enter the Video
Password Authentication interface, as shown in Figure 8-6 ⑥.
Figure 8-6 ⑥
【Video Password Authentication】 After opening, encrypt all the devices and platforms
connected to the camera video, and connect to the IP Camera video by entering the correct
username and password.
【Enable RTSP Encryption】 When enabled, the RTSP stream of the camera is encrypted.
【Enable BITVISION Encryption】 When enabled, encrypt the stream between the camera and
the BitVision App.
43