Table of Contents
Advertisement
User's Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P
○ 5 Vehicle Detection (ICA-M3580P/ICA-M4580P only)
The vehicle detection function is used to detect that the density of the vehicle in the set area
exceeds the set threshold, and the alarm is linked according to the judgment result.
The specific operation steps are as follows:
Step 1: In the main interface click on the "Configuration → Events → Smart Event → Vehicle
Detection" to enter the Vehicle Detection settings interface, as shown in Figure 8-42.
Figure 8-42
Step 2: Check "Enable" to enable vehicle detection.
Step 3: Select "Warn Region": The system supports setting up to 4 warn region. After selecting
a warn region, you need to make the following settings. After setting, please click "Save" below.
【Drawing Area】Click "Drawing Area", move the mouse to the preview screen, click the left
mouse button and draw the endpoint of the quadrilateral guard area, then click the preview
interface to complete the area drawing.
【All Area】When need all areas to be detected, click "All Area" to automatically select all areas.
【Clear All】Used to delete the selected alert area.
【Time threshold(min)】 Indicates that the target generates an alarm after continuous
movement in the detection area. The larger the time threshold, the longer the target continues
to move in the detection area to trigger an alarm.
【Sensitivity】 Used to set the sensitivity of detected area intrusion. The default is 50. Drag the
progress bar or enter the value directly in the value box to modify the sensitivity. The greater the
sensitivity, the easier it is to trigger an alarm.
80
Advertisement
Table of Contents
