User's Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P
The specific operation steps are as follows:
Step 1: In the main interface, click "Configuration → Storage → Schedule Configuration
→ Capture" to enter the capture parameter setting interface, as shown in Figure 8-46 ①.
Step 2: Set the capture plan.
-
Method 1: Click the capture plan, manually fill in the start time and end time, set up and
click Save. If you need to delete the time period, click the "Del All" button and then reset
the time period.
-
Method 2: Click the capture plan, two arrows will be displayed at both ends of the time
period. Move the adjustment arrow left or right to adjust the arming time.
Step 3: Repeat step 2 to set up a complete recording plan.
Step 4: Click "Application" to complete the setting of the arming time.
Step 5: Click "Capture Parameters" to enter the capture parameters interface, as shown in
Figure 8-46 ②.
Figure 8-46 ①
Figure 8-46 ②
85