P2P - Planet ICA-3480 User Manual

User's Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P

8.3.2 P2P

① P2P
P2P is a private network penetration technology. It does not need to apply for a dynamic domain
name, perform port mapping, or deploy a transit server. You can directly scan the QR code to
download a mobile client. After registering an account, you can add and manage multiple IP
cameras and NVR devices simultaneously on the mobile client.
You can add devices in the following two ways to manage multiple devices.
1) Scan the QR code for the mobile phone system, download the app and register the account.
For details, see the App User Manual on the website.
2) Log on to the P2P platform, register an account, and add the device via the serial number.
 The device P2P is enabled by default. To use this function, the device must be
connected to the external network, and the connection status is displayed as
"P2P connection successful". Otherwise, it will not work properly.
P2P steps are as follows:
Step1: In the main interface, click " Config  Network  P2P" to enter the P2P settings
interface, as shown in Figure 8-7 ①.
Step2: Make sure that the IP camera accesses the external network and click "
P2P.
Step 3: Click "Apply" to save the configuration.
Step 4: Refresh page -- the status shows "P2P connection successful". This indicates that P2P
is enabled and can be used normally.
App Client operation example
The following content is introduced by taking the operation of the mobile phone client (BitVision
App) as an example. The steps are as follows:
Step 1: Use the Android or iOS phone to scan the corresponding QR code to download and
install the BitVision App.
Step 2: Run the client and log in to the account (No account is required to register first).
Figure 8-7 ①
46
" to open