Planet ICA-3480 User Manual page 84

User's Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P
Step 4: Set the Pre-recorded time and Video delay time，click the "Advance parameters", You
can set the Pre-recorded time (Unlimited, 10s, 15s, 20s, 25s,30s) and
Video delay (5s, 10s, 30s, 1min, 2min, 5min, 10min), as shown in Figure 8-45 ②.
Step 5: Click "Application" to complete the setting of the arming time.

You can set up more than one time period for up to 8 time periods.

After the day of deployment time is set, if the other time also need to set the
same arming time, click the right side of the timeline "
"copy to" interface check the "Select All" or a day, then click "OK".

Tick "Select All" to enable recording for all time.

No SD card video recording function of the camera no SD card management
interface, please take the camera physical specific functions shall prevail.

When the video type selects motion detection, alarm, the device will also
perform scheduled recording while recording the selected recording type.

The pre-recording time and recording delay can be used for motion detection
recording, alarm recording, motion detection and alarm recording.
② Capture
The capture is used to set the camera capture plan and capture parameters. After setting, the
IP camera will automatically capture images. In the snapshot parameters interface, when the
Enable timed capture is selected, the camera can set the snapshot schedule as needed.
Figure 8-45 ②
84
" copy button, in the