Planet ICA-3480 User Manual page 42

User's Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P
④ FTP
Set the FTP (File Transfer Protocol) server and you can store the alarm icon to the FTP server.
Precondition
You need to purchase or download the FTP service tool and install the software on your PC.
 To create an FTP user, you need to set the FTP folder write permission;
otherwise the image will not be uploaded successfully.
The steps to configure FTP are as follows:
Step 1: In the main interface, click "Config  Network  Basic Setup  FTP" to enter the FTP
server settings interface, as shown in Figure 8-6 ⑤.
Step 2: Enter the server address, port, user name, password, confirm the password, storage
first level directory, storage secondary directory, check "Auto Cover", and select the upload FTP
server image format JPEG.
Step 3: Click "Apply" to save the configuration.
Step 4: Click "Test" to confirm whether the network connection and FTP configuration are
correct.
 If the test fails, please recheck the network or FTP configuration.
Figure 8-6 ⑤
42