Network - Emerson TopWorx 4310 Instruction Manual

Instruction Manual
D103391X012
The remaining life value of the power module is an estimate. The life span of the power module is affected by many operating
conditions, including: The update or burst rate of the 4310 wireless position monitor. The number of devices operating through
this device to the gateway, and their update or burst rates. Network changes causing more or less traffic through the device; for
example, a failure in another wireless device in the mesh network, which results in re‐routing and forces more traffic through the
device. Temperature extremes (both high and low) will also affect the life span of the power module.
From the power module life display, press NEXT to go back to the Power menu. Press NEXT to enter the Network
menu.
Figure 19. Local Interface Flow Chart
QUICK POSITION
left
Power
right
left
Voltage
Network ID
right
Join Status
Life
1
W9639
LEFT
NOTE:
1 THE LIFE MENU DOES NOT APPEAR WHEN THE EXTERNAL POWER OPTION IS INSTALLED.

Network

Access the Network screen by pressing the right button (STATUS), the left button (SELECT), and then the right button
(NEXT) again.
Press SELECT to display the NETWORK ID configured in the device. Press NEXT to show the current network
operational state:
STATUS
left
Network
right
left
Tag
right
right
Position
RIGHT
SLEEP
LOGO
right
right
Calibrate
left
Open or
Closed First
Set ppen
Set closed
Apply
Result
4310 Wireless Position Monitor
LANGUAGE
squawk
right
Setup
left right
Handheld
December 2011
both
Exit
21