Emerson TopWorx 4310 Instruction Manual
  1. Manuals
  2. Brands
  3. Emerson Manuals
  4. Measuring Instruments
  5. TopWorx 4310
  6. Instruction manual

Emerson TopWorx 4310 Instruction Manual

Wireless position monitor
Hide thumbs Also See for TopWorx 4310:
Table of Contents

Advertisement

Quick Links

Download this manual
Instruction Manual
D103391X012
October 2009
TopWorxr 4310 Wireless Position Monitor
Contents
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
www.topworx.com
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
4310 Wireless Position Monitor
1
1
4
4
4
4
4
4
5
5
5
6
7
7
9
9
W9633
10
11
Figure 1. TopWorx 4310 Position Monitor
11
11

Introduction

11
11

Scope of Manual

12
12
This instruction manual includes specifications,
13
installation, initial setup, configuration, operation,
13
troubleshooting, and maintenance information for the
14
TopWorx 4310 wireless position monitor.
16
This manual describes using the local interface to
18
setup and calibrate the instrument.
19
20
Do not install, operate, or maintain a 4310 wireless
21
position monitor without being fully trained and
21
qualified in valve, actuator, and accessory
installation, operation, and maintenance. To avoid
21
personal injury or property damage, it is important to
21
carefully read, understand, and follow all of the
22
contents of this manual, including all safety cautions
22
and warnings. If you have any questions about these
23
instructions, contact your Emerson Process
23
Management sales office before proceeding.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TopWorx 4310 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Emerson TopWorx 4310

Summary of Contents for Emerson TopWorx 4310

  • Page 1: Table Of Contents

    Language Selection ..... Figure 1. TopWorx 4310 Position Monitor Quick Position ......
  • Page 2 Instruction Manual 4310 Wireless Position Monitor October 2009 Table 1. Specifications Available Mountings Wireless Classifications Quarter−turn rotary−shaft, J sliding−stem or Class A digital device, complies with part 15 of the FCC Rules linear applications Contains FCC ID: LWZRM2510 Can also be mounted on other actuators that Contains IC: 2731A−RM2510 comply with IEC 60534−6−1, IEC 60534−6−2, VDI/VDE 3845 and NAMUR mounting standards.
  • Page 3 2. Due to the combustible nature of the lithium content, the power module has special installation, operation, storage, and/or shipping requirements. Observe all warnings included with the power module before installing, operating, storing, or shipping. Contact your Emerson Process Management sales office if additional information is needed.

  • Page 4: Description

    Liquid Crystal Display (LCD) other products, contact: and two (2) pushbuttons. The local interface Emerson Process Management provides the capability to setup and calibrate the Educational Services, Registration monitor.

  • Page 5: Using The Field Communicator

    Instruction Manual 4310 Wireless Position Monitor October 2009 4. In AMS select the device that is connected to the HART modem. Select Online, Overview, then Join Device to Network (see figure 2). 5. Remove the leads from the 4310 and close the cover.

  • Page 6: Valve / Actuator Mounting

    Instruction Manual 4310 Wireless Position Monitor October 2009 VALID TRAVEL RANGE 25 mm (1 INCH) SHOWN ROTARY 1−INCH ARRAY NOTE: VALID TRAVEL RANGE INDICATED BY WHITE ARROWS 2− OR 4−INCH ARRAY MAGNET ASSEMBLY (ATTACHED TO VALVE STEM) Figure 4. Magnet Assemblies permanent damage.

  • Page 7: Sliding−Stem (Linear)

    Instruction Manual 4310 Wireless Position Monitor October 2009 MOUNTING INSERT FACES MOUNTING FEEDBACK INSERT ARRAY BOLT OPTIONAL FACES MOUNTING HOLES 5.7 $ 0.8 0.22 $ 0.03 BASE OF HOUSING GE42127 Rev A (INCH) Figure 5. Mounting—Sliding−Stem Magnet Array MOUNTING HOLES FOR ROTARY NAMUR, M6 NOTE: ANY OF THE MOUNTING HOLES MAY BE USED FOR LINEAR ACTUATORS...
  • Page 8 Instruction Manual 4310 Wireless Position Monitor October 2009 MOUNTING INSERT FACES MAGNET MOUNTING ASSEMBLY INSERT FACES 19.5 $ 0.8 0.77 $ 0.03 BASE OF HOUSING ROTARY MOUNTING BRACKET (INCH) GE42123 Rev A W9637 Figure 7. For Rotary−Shaft Actuators (Typical Mounting Bracket) Figure 8.

  • Page 9: Communication Connections

    Instruction Manual 4310 Wireless Position Monitor October 2009 NUMBER OF CHILDREN IMPACT ON ON POWER MODULE LIFE UPDATE RATE AND NETWORK SIZE UPDATE RATE (SECONDS) NUMBER OF CHILDREN STANDARD EXTENDED NOTE: 60 SECOND UPDATE RATE, CONSTANT Figure 10. Update Rate and Network Size TEMPERATURE OF 25_C (77_F).

  • Page 10: Basic Setup

    Instruction Manual 4310 Wireless Position Monitor October 2009 SLEEP QUICK POSITION STATUS LOGO LANGUAGE right left squawk both left right right Setup Power Network Calibrate right left right left left right left Voltage Network ID Handheld Exit Open or right right right Closed First...

  • Page 11: Language Selection

    The number the sleep state (blank or off). The buttons can be of devices operating through this pressed alone or simultaneously. The Emerson logo device to the gateway, and their will display when the LCD is activated from a HART update or burst rates.

  • Page 12: Calibration

    Instruction Manual 4310 Wireless Position Monitor October 2009 Press the right button to return to the STATUS The calibration status will be displayed: menu. SUCCESS—indicates that the calibration procedure Press NEXT while in the STATUS menu to access was successful. the CALIBRATE menu.

  • Page 13: Field Communicator

    Instruction Manual 4310 Wireless Position Monitor October 2009 Field Communicator Primary Purpose Variables 1 Offline 1 Switch Status 2 Online 2 Time Since Reset 3 Frequency Device 4 Utility Overview 1 Check Status Device Information 2 Primary Purpose Variable 1 Manufacturer 3 Shortcuts 2 Model 3 HART Universal Rev.

  • Page 14: Configure

    Instruction Manual 4310 Wireless Position Monitor October 2009 Device Identification 2-2-1 1 HART Tag Guided Setup 2 HART Long Tag 1 Device Setup Field Communicator 3 Descriptor 1 Offline 4 Message Manual Setup 2 Online 1 Device Identification 2-2-2 3 Frequency Device Wireless 2 Wireless 4 Utility...
  • Page 15 Instruction Manual 4310 Wireless Position Monitor October 2009 HART Long Tag—enter the HART Long Tag Network ID—displays the default Network ID. information (up to 32 characters). Join Key to Network—enter the Network ID (up to 5−digits) and the Join Key (4 sets of 8 hexadecimal Descriptor—enter a descriptor for the application digits).

  • Page 16: Service Tools

    Calibration Date—indicates when the instrument Note was last calibrated. Contact your Emerson Process Calibrate—allows you run a calibration on the Management sales office if a instrument. Follow the prompts on the Field replacement power is required. Do not Communicator to calibrate the instrument.
  • Page 17 Instruction Manual 4310 Wireless Position Monitor October 2009 Variables Field Communicator 1 Switch Status 1 Offline 2 Electronics Temp 2 Online 3 Power Module Voltage 3 Frequency Device 4 Accumulated Cycles 4 Utility 5 Time Since Reset Run Time Extremes Online Service Tools 1 Max Recorded Temp...

  • Page 18: Accessing Features

    Instruction Manual 4310 Wireless Position Monitor October 2009 WIRELESS TAB TRIGGER POINTS TAB CHANGE UPDATE PERIOD MANUAL MANUAL SETUP SETUP CHANGE TRIGGER PTS CONFIGURE CONFIGURE Figure 18. Change Update Rate in AMS Wireless Configurator Figure 19. Setting Trigger Point in AMS Wireless Configurator and AMS Device Manager and AMS Device Manager AMS Wireless Configurator or AMS Device...

  • Page 19: Principle Of Operation

    Instruction Manual 4310 Wireless Position Monitor October 2009 VARIABLES TAB ENTER ALERT TRIGGER VALUE RESET CYCLE COUNTER VARIABLES ALERT POWER SETUP MODULE VOLTAGE CONFIGURE APPLY SERVICE TOOLS Figure 20. Setting the Cycle Counter in AMS Wireless Configurator and AMS Device Manager Figure 21.

  • Page 20: Maintenance

    HOUSING (4 TOTAL) COVER POWER SCREWS MODULES W9640 Figure 22. TopWorx 4310 Wireless Position Monitor Maintenance in this manual. Improper techniques or component selection may invalidate When replacing any of the components of the 4310 the product specifications, as wireless position monitor the maintenance should be indicated in table 1.

  • Page 21: Replacing The Instrument

    The power module is designed to be mounted to a control valve, perform the following field replaceable. Contact your basic steps: Emerson Process Management sales office if a replacement power module Instrument Removal is required. Remove the bolts connecting the 4310 housing to the mounting bracket.

  • Page 22: Removal

    Instruction Manual 4310 Wireless Position Monitor October 2009 J2 GND TERMINAL J1 PWR TERMINAL STANDARD LIFE POWER MODULE W9645 Figure 24. Power Module 3. Remove the 4 smaller screws providing the mechanical connection to the housing. EXTENDED LIFE POWER MODULE 4.

  • Page 23: Parts

    Instruction Manual 4310 Wireless Position Monitor October 2009 Parts Replaceable Parts Note Contact your Emerson Process Management sales WARNING office for replacement power module FS numbers. Standard Power Module Use only genuine Emerson Extended Life Power Module replacement parts. Components that...
  • Page 24 TopWorx, AMS, and Fisher are marks owned by one of the companies in the Emerson Process Management business division of Emerson Electric Co. Emerson Process Management, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. WirelessHART and HART are marks owned by the HART Communication Foundation.

Table of Contents