Emerson Fisher 4320 Instruction Manual

Emerson Fisher 4320 Instruction Manual

Wireless position monitor
Hide thumbs Also See for Fisher 4320:

Advertisement

Quick Links

Instruction Manual
D103392X012
October 2009
Fisherr 4320 Wireless Position Monitor
Contents
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
www.Fisher.com
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
4320 Wireless Position Monitor
1
1
4
4
4
4
4
5
6
7
7
9
9
4
5
5
W9634
10
Figure 1. Fisher 4320 Wireless Position Monitor
10
11
11

Introduction

11
11
11

Scope of Manual

12
This instruction manual includes specifications,
12
installation, initial setup, configuration, operation,
13
troubleshooting, and maintenance information for the
13
Fisher 4320 wireless position monitor.
15
18
This manual describes using the local interface to
19
setup and calibrate the instrument.
20
21
Do not install, operate, or maintain a 4320 wireless
22
position monitor without being fully trained and
22
qualified in valve, actuator, and accessory
installation, operation, and maintenance. To avoid
22
personal injury or property damage, it is important to
23
carefully read, understand, and follow all of the
23
contents of this manual, including all safety cautions
23
and warnings. If you have any questions about these
24
instructions, contact your Emerson Process
24
Management sales office before proceeding.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Fisher 4320 and is the answer not in the manual?

Questions and answers

Summary of Contents for Emerson Fisher 4320

  • Page 1: Table Of Contents

    ......Figure 1. Fisher 4320 Wireless Position Monitor Using the Local User Interface .
  • Page 2 Instruction Manual 4320 Wireless Position Monitor October 2009 Table 1. Specifications Available Mountings Wireless Classifications Quarter−turn rotary−shaft, J sliding−stem or Class A digital device, complies with part 15 of the linear applications FCC Rules Contains FCC ID: LWZRM2510 Can also be mounted on other actuators that Contains IC: 2731A−RM2510 comply with IEC 60534−6−1, IEC 60534−6−2, VDI/VDE 3845 and NAMUR mounting standards...
  • Page 3 2. Due to the combustible nature of the lithium content, the power module has special installation, operation, storage, and/or shipping requirements. Observe all warnings included with the power module before installing, operating, storing, or shipping. Contact your Emerson Process Management sales office if additional information is needed.
  • Page 4: Description

    Local Interface—All 4320 wireless position monitors other products, contact: come standard with a Liquid Crystal Display (LCD) Emerson Process Management and two (2) pushbuttons. The local interface Educational Services, Registration provides the capability to setup and calibrate the P.O.
  • Page 5: Installation

    Instruction Manual 4320 Wireless Position Monitor October 2009 4. In AMS select the device that is connected to the HART modem. Select Online, Overview, then Join Device to Network (see figure 2). 5. Remove the leads from the 4320 and close the cover.
  • Page 6: Valve / Actuator Mounting

    Instruction Manual 4320 Wireless Position Monitor October 2009 VALID TRAVEL RANGE 25 mm (1 INCH) SHOWN 1−INCH ARRAY ROTARY NOTE: VALID TRAVEL RANGE INDICATED BY WHITE ARROWS MAGNET 2− OR 4−INCH ARRAY ASSEMBLY (ATTACHED TO VALVE STEM) Figure 4. Magnet Assemblies W9635 permanent damage.
  • Page 7: Sliding−Stem (Linear) Actuators (E.g. Fisher 667)

    Instruction Manual 4320 Wireless Position Monitor October 2009 MOUNTING INSERT FACES MOUNTING FEEDBACK INSERT OPTIONAL ARRAY BOLT FACES MOUNTING HOLES 5.7 $ 0.8 0.22 $ 0.03 BASE OF HOUSING GE42127 Rev A (INCH) Figure 5. Mounting—Sliding−Stem Magnet Array MOUNTING HOLES FOR ROTARY NAMUR, M6 NOTE: ANY OF THE MOUNTING HOLES MAY BE USED FOR LINEAR ACTUATORS...
  • Page 8 Instruction Manual 4320 Wireless Position Monitor October 2009 MOUNTING INSERT FACES MOUNTING MAGNET INSERT ASSEMBLY FACES 19.5 $ 0.8 0.77 $ 0.03 BASE OF ROTARY HOUSING MOUNTING BRACKET (INCH) GE42123 Rev A W9637 Figure 7. For Rotary−Shaft Actuators (Typical Mounting Bracket) Figure 8.
  • Page 9: Communication Connections

    Instruction Manual 4320 Wireless Position Monitor October 2009 NUMBER OF CHILDREN IMPACT ON ON POWER MODULE LIFE UPDATE RATE AND NETWORK SIZE UPDATE RATE (SECONDS) NUMBER OF CHILDREN STANDARD Figure 10. Update Rate and Network Size EXTENDED NOTE: 60 SECOND UPDATE RATE, CONSTANT TEMPERATURE OF 25_C (77_F).
  • Page 10: Basic Setup

    Instruction Manual 4320 Wireless Position Monitor October 2009 SLEEP QUICK POSITION STATUS LOGO LANGUAGE right left squawk both left right right Setup Power Network Calibrate right left right left left right left Voltage Network ID Handheld Exit 0 or 100% right right right...
  • Page 11: Language Selection

    The number the sleep state (blank or off). The buttons can be of devices operating through this pressed alone or simultaneously. The Emerson logo device to the gateway and their update will display when the LCD is activated from a HART or burst rates.
  • Page 12: Calibration

    Instruction Manual 4320 Wireless Position Monitor October 2009 The top reading indicates % of SPAN, the state of Applying calibration points without the valve (OPEN, PARTIALLY OPEN, or CLOSED) changing the valve position will result is on the bottom line. in the calibration attempt being unused or discarded.
  • Page 13: Using The Field Communicator

    Instruction Manual 4320 Wireless Position Monitor October 2009 Field Communicator Primary Purpose Variables 1 Offline 1 Percent of Span 2 Online 2 Switch Status 3 Frequency Device 3 Time Since Reset 4 Utility Overview 1 Check Status Device Information 2 Primary Purpose Variable 1 Manufacturer 3 Shortcuts 2 Model...
  • Page 14 Instruction Manual 4320 Wireless Position Monitor October 2009 D Radio Information Calibrate Follow the prompts on the Field Communicator to Manufacturer—identifies the manufacturer of the calibrate the instrument. radio. Join Device to Network allows you to enter the Network ID (up to 5−digits) and the Join Key (4 sets Model—indicates the radio model.
  • Page 15: Configure

    Instruction Manual 4320 Wireless Position Monitor October 2009 Device Identification 2-2-1 1 HART Tag Guided Setup 2 HART Long Tag 1 Device Setup Field Communicator 3 Descriptor 1 Offline 4 Message Manual Setup 2 Online 1 Device Identification 2-2-2 3 Frequency Device Wireless 2 Wireless 4 Utility...
  • Page 16 Instruction Manual 4320 Wireless Position Monitor October 2009 SEARCHING—the device is waiting to detect the normally available, even while the instrument is in presence of a wireless network with the same burst mode. Between each burst mode transmission Network ID and join key. sent by the instrument, a short pause allows the Field Communicator or control system to initiate a request.
  • Page 17 This is done when replacing the power module. Accumulated Cycles—indicates the number of Note accumulated cycles. Contact your Emerson Process Reset Cycle Counter—select Yes to reset the cycle Management sales office if a counter to 0 (zero). Select No to retain the current replacement power is required.
  • Page 18: Service Tools

    Instruction Manual 4320 Wireless Position Monitor October 2009 Variables 1 Percent of Span Field Communicator 2 Switch Status 1 Offline 3 Electronics Temp 2 Online 4 Power Module Voltage 3 Frequency Device 5 Accumulated Cycles 4 Utility 6 Time Since Reset Run Time Extremes Online Service Tools...
  • Page 19: Accessing Features

    Instruction Manual 4320 Wireless Position Monitor October 2009 TRIGGER POINTS TAB WIRELESS TAB CHANGE UPDATE PERIOD MANUAL MANUAL SETUP SETUP CHANGE TRIGGER PTS CONFIGURE CONFIGURE Figure 19. Setting Trigger Point in AMS Wireless Configurator and AMS Device Manager Figure 18. Change Update Rate in AMS Wireless Configurator and AMS Device Manager AMS Wireless Configurator or AMS Device Accessing Features...
  • Page 20: Principle Of Operation

    Instruction Manual 4320 Wireless Position Monitor October 2009 VARIABLES TAB ENTER ALERT TRIGGER VALUE RESET CYCLE COUNTER VARIABLES ALERT POWER SETUP MODULE VOLTAGE CONFIGURE APPLY SERVICE TOOLS Figure 20. Setting the Cycle Counter in AMS Wireless Configurator and AMS Device Manager Figure 21.
  • Page 21: Maintenance

    HOUSING (4 TOTAL) COVER POWER SCREWS MODULES W9640 Figure 22. Fisher 4320 Wireless Position Monitor Maintenance in this manual. Improper techniques or component selection may invalidate When replacing any of the components of the 4320 the product specifications, as wireless position monitor the maintenance should be indicated in table 1.
  • Page 22: Replacing The Instrument

    Instruction Manual 4320 Wireless Position Monitor October 2009 Note This product is an FCC approved device. Changes or modifications to the 4320 wireless position monitor that are not expressly approved by the party responsible for compliance may void your authority to operate the device.
  • Page 23: Replacing The Power Module

    TERMINAL J1 PWR Note TERMINAL The power module is designed to be field replaceable. Contact your Emerson Process Management sales office if a replacement power module is required. WARNING Proper disposal of used power modules, due to the combustible nature of the lithium content, is required.
  • Page 24: Parts

    Fisher is a mark owned by one of the companies in the Emerson Process Management business division of Emerson Electric Co. Emerson Process Management, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. WirelessHART and HART are marks owned by the HART Communication Foundation.

Table of Contents