D Receiving A Distress Cancel Call; D Receiving A Distress Relay Call - Icom GM800 Instruction Manual

7
DSC OPERATION
■ Receiving DSC calls

D Receiving a Distress Cancel call

1. When a Distress Cancel call is received:
• Alarm sounds.
• The following screen is displayed and the backlight
blinks.
• " " is displayed and "
Push [Alarm Off]
2. Select your desired action.
L To send an acknowledgement, push [Accept]
[Hold]: Push [Hold]
screen.
[Pause]: Push [Pause]
countdown.
[Accept]: Push [Accept]
Task mode.
Inffrratifn
L
• The communication frequency is automatically
selected. Monitor it, because a coast station may
require assistance.
• Rotate [CH/GRP] to confirm the call contents.
• See page 29 for details of the software key functions
in the DSC Task mode.
3. Push [Standby Mode]
Standby mode.
59
" blinks.
.
Push
any
to return to the Main
to pause the
to enter the DSC
to return to the
TIP: When you push [Pause]
countdown will be paused. Push [Resume]
restart the countdown.

D Receiving a Distress Relay call

1. When a Distress Relay call is received:
• Alarm sounds.
• The following screen is displayed and the backlight
blinks.
.
• " " is displayed and "
Push [Alarm Off]
2. Select your desired action.
LTo send an acknowledgement, push [Accept]
[Hold]: Push [Hold]
screen.
[Pause]: Push [Pause]
countdown.
[Accept]: Push [Accept]
Task mode.
in step 2, the
to
" blinks.
.
Push
any
to return to the Main
to pause the
to enter the DSC
.