1.6.3. Electrical installation
Personnel must have a sound knowledge of the relevant electrical codes and specifications
covering low and medium voltage equipment, be experienced with electrical wiring principles
and know the electrical symbols typically used in wiring diagrams.
1.6.4. Operation
The personnel include all persons who operate the drive from the local operator panel of the
drive. The personnel must know the functions of the operator panel, be adequately trained for
the drive, and know the driven process. Special knowledge of frequency converter technology is
not required.
1.6.5. Maintenance
The personnel include all persons who
–
Are qualified to carry out preventive and corrective maintenance on drive as described in this
manual
–
Are thoroughly familiar with the drive
–
Have a sound knowledge of the relevant electrical codes and specifications covering low and
medium voltage equipment
–
Are able to assess the hazards associated with the energy sources of the drive and act
correspondingly
–
Know the safe shutdown and grounding procedures for the drive system
1.7. User's responsibilities
It is the responsibility of those in charge of the drive to ensure that each person involved in the
installation, operation or maintenance of the drive has received the appropriate training and
has thoroughly read and clearly understood the instructions in this manual and the relevant
safety instructions.
1.8. Intended use of equipment
Those in charge of the drive must ensure that the drive is only used as specified in the
contractual documents, operated under the conditions stipulated in the technical
specifications and on the rating plate of the drive, and serviced in the intervals specified by ABB.
Use of the drive outside the scope of the specifications is not permitted.
Intended equipment use also implies that only spare parts recommended and approved by ABB
must be used.
Unauthorized modifications and constructional changes of the drive are not permitted.
PRODUCT
ACS6080
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS842007 E01
ABOUT THIS MANUAL
REV.
LANG.
PAGE
I
en
22/211