Table of Contents
Advertisement
3
Fig. Control panel
1. Display
2. Ignition lock
3. Parking brake
1
Fig. Positioning
1. Chocks
76
Switching off
Set the speed control in idling position and allow the
1
engine to idle for a few minutes to cool down.
Check the display to see if any faults are indicated.
Switch off all lights and other electrical functions.
Activate the parking brake (3) and then turn the
ignition lock (2) to the left to the off position.
2
Fit the instrument cover on the display and top of the
control box (on rollers without cab), and lock it.
Parking
Chocking the drums
4812159001_I.pdf
Never disembark from the machine when the is
Never disembark from the machine when the is
engine running, unless the parking brake is
engine running, unless the parking brake is
activated.
activated.
Make sure that the roller is parked in a safe place
Make sure that the roller is parked in a safe place
with respect to other road users. Chock the drums
with respect to other road users. Chock the drums
if the roller is parked on sloping ground.
if the roller is parked on sloping ground.
Remember the risk of freezing during the winter.
Remember the risk of freezing during the winter.
Fill the engine cooling system and the
Fill the engine cooling system and the
screenwash bottle in the cab with suitable
screenwash bottle in the cab with suitable
anti-freeze mixtures. See also the maintenance
anti-freeze mixtures. See also the maintenance
instructions.
instructions.
Operation
2019-11-05
Advertisement
Table of Contents
