Fayat Group DYNAPAC CA2800 Instruction Manual page 51

No No Designation Designation
25 25 Parking brake Parking brake
26 26 Hazard indicators (Optional) Hazard indicators (Optional)
27 27 Rotating beacon (Optional) Rotating beacon (Optional)
28 28 Reserve Reserve
29 29 Gear position switch, Dip Gear position switch, Dip
30 30 Reserve Reserve
31 31 Amplitude selector (DCO) Amplitude selector (DCO)
2019-11-05
Symbol Symbol Function Function
When pressed, the parking brake is activated. When pressed, the parking brake is activated.
To release the brakes, slide the red part back (towards To release the brakes, slide the red part back (towards
you) and change the position of the switch. you) and change the position of the switch.
NOTE:When starting the machine, the parking brake NOTE:When starting the machine, the parking brake
must be activated. must be activated.
To activate the brakes, press the top of the switch to To activate the brakes, press the top of the switch to
change the position of the switch. change the position of the switch.
To release the brakes, press down the red part at the To release the brakes, press down the red part at the
same time as the switch and change the position of same time as the switch and change the position of
the switch. the switch.
NOTE:When starting the machine, the parking brake NOTE:When starting the machine, the parking brake
must be activated. must be activated.
Activate the hazard warning light by depressing the Activate the hazard warning light by depressing the
button. button.
Activate the rotating beacon by pressing the switch. (If Activate the rotating beacon by pressing the switch. (If
the machine has two rotating beacons, both are the machine has two rotating beacons, both are
activated) activated)
Activates the four different gear positions. (1) Hare, (2) Activates the four different gear positions. (1) Hare, (2)
Drum spin, (3) Wheelspin and (4) Tortoise. The current Drum spin, (3) Wheelspin and (4) Tortoise. The current
gear position is shown in the display by means of the gear position is shown in the display by means of the
following figures. following figures.
1: Transport mode 1: Transport mode
2: Used if the drum is slipping. 2: Used if the drum is slipping.
3: Used if the rear tires are slipping. 3: Used if the rear tires are slipping.
4: Working mode. 4: Working mode.
Only for machine equipped with "Compaction Only for machine equipped with "Compaction
Optimizer". Optimizer".
4812159001_I.pdf
Machine description
39