Master Switch - Fayat Group DYNAPAC CA2800 Instruction Manual

Fig. Cover, left side

1. Master switch

2019-11-05
Master switch
Before leaving the roller for the day, switch the master
switch (1) to the disconnected position and remove the
handle.
1
This will prevent battery discharging and will also
make it difficult for unauthorized persons to start and
operate the machine. Also lock the hood to the engine
compartment.
4812159001_I.pdf
Before switching off the battery isolation switch, Before switching off the battery isolation switch,
wait for at least 30 seconds after the ignition lock wait for at least 30 seconds after the ignition lock
has been switched off, in order to avoid the has been switched off, in order to avoid the
engine's electronic control unit (ECU) sustaining engine's electronic control unit (ECU) sustaining
damage. damage.
Operation
77