Alarm Output; Selecting The Measurement Data Source - Omron ZS-DSU41 User Manual

Section 4

Alarm Output

Alarm Output
On the ZS-DSU, you can set original judgment conditions to measurement data acquired
from controllers. These judgment conditions can be used as alarm outputs (HH output, LL
output).
Wiring the I/O Cable p.2-10

Selecting the Measurement Data Source

Set the source and hysteresis to be judged when the judgment results of the logging data
(measurement data) are to be output as an alarm.
FUN Mode-[I/O SET]-[JUDGE]
Setting
SOURCE
HYS
ZS-DSU
4-2
User's Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Set the source to be judged.
Range: SourceA to SourceJ
Set the hysteresis width.
HIGH threshold value
Measured value
LOW threshold value
ON
HIGH
OFF
Output
ON
PASS
OFF
ON
LOW
OFF
Setting range: 0 to 999.999 (default value: 20µm)
Description
Hysteresis (hysteresis width)
Action point
Return point