Section3
Setting the Display Method
Setting the LCD display
Set how the LCD screen is displayed in the RUN mode.
Setting display ON/OFF
■
Set whether or not to display the LCD screen.
RUN Mode-MENU key-[LCD]-[ON/OFF]
ON
AUTOOFF
OFF
Setting the backlight ON/OFF
■
Set whether or not to turn the LCD screen's backlight ON or OFF.
RUN Mode-MENU key-[LCD]-[B.LIGHT]
ON
AUTOOFF
OFF
Customizing the LCD display
■
Set this item to display customized characters on the LCD screen.
RUN Mode-MENU key-[LCD]-[CUSTOM]
ON/OFF
CUSTOM
ZS-DSU
3-38
User's Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Setting
Displays the LCD screen at all times. (default value)
Turns the LCD screen display OFF when no operations are performed for
one minute.
Turns the LCD screen OFF.
(This setting is valid only in the RUN mode. Note, however, that pressing
the MENU key displays the display customize menu. )
Setting
Turns the LCD screen backlight ON at all times. (default value)
Turns the backlight OFF when no operations are performed for one
minute.
Turns the LCD screen backlight OFF.
Setting
Set this item to ON to display characters set at [CUSTOM] on the LCD
screen. (default value: OFF)
Use this setting to edit characters to display on the LCD screen. (max. 16
digits)
• Call up the initial character of each character group using function keys 1
to 4. (Other signals are assigned to the later half of each group.)
1: A to Z
2: a to z
3: KANA
4. Numbers, :, ;, <, =, >, ?, @
• Switch the characters in order using the UP or DOWN key.
• Move the digits by the LEFT or RIGHT key.
• To clear a character, select a space.
Description
Description
Description