Table of Contents
Advertisement
Section3
External Bank Function
External Bank Function
A maximum of 128 sets of bank data can be saved on Memory Card. Bank Data can be
loaded from Memory Card to gang-mounted Sensor Controllers or the Multi-Controller as
necessary when changing the device setup when there are not enough banks on the
controller.
RUN Mode-MENU Key-[BANK]
Setting
CF→ CONT
(CF→ CONTROLLER)
CONT→ CF
(CONTROLLER→ CF)
ZS-DSU
3-32
User's Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Transfers the bank data on the Memory Card to the current bank of the speci-
fied channel.
When [CF→ CONT] is selected, the following setting items are subsequently
displayed:
• FILE No.
: BANK0 to BANK127
• REWRITE TARGET CH: 1CH to 10CH
The controller's current settings are changed. However, this does not
mean that the content of the banks is saved. To save current set-
tings, save them on the controller in question.
Saves the data of the specified bank of the specified channel as bank data on
Memory Card.
When [CONT→ CF] is selected, the following setting items are subsequently
displayed:
• SAVE SOURCE CH
: 1CH to 10CH
• SAVE SOURCE BANK : B1 to B4
• FILE No.
: BANK0 to BANK127
Description
Advertisement
Table of Contents
