Table of Contents
Advertisement
Setting the Data Format
Set the format that logged data is saved in.
FUN Mode-[LOGGING]-[FORMAT]
Setting
I/ODATA
ALIGN (data alignment direc-
tion)
LF (line feed/row feed input)
■ Data format
The format of logging data differs according to the direction of alignment and line feed input.
●
Row direction
• I/O data save OFF, line feed input OFF
Times
LabelA
LabelB
Data
Data
1
2
3
4
5
• I/O data save ON, line feed input OFF
Times
LabelA
Data
I/O
1
2
3
4
5
• I/O data save OFF, line feed input ON
When there are only two input sources and a line feed is performed every two times.
Times
LabelA_1
LabelB_1
Data
Data
1
2
3
4
5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Sets whether or not to save flag information (header information) for judgment
output, for example.
Range: NONE, SAVE (default: NONE)
Set the direction that logging data is aligned.
Range: COLUMN, ROW (default: COLUMN)
Sets whether or not to perform line feed or row feed by line feed/row feed sig-
nals input externally.
When "OFF" is set, line feeds or row feeds are performed each time.
When "ON" is set, line feeds or row feeds are not performed until there is a
line feed/row feed input.
Range: OFF, ON (default value: OFF)
LabelC
LabelD
LabelE
LabelF
Data
Data
Data
Data
LabelB
LabelC
Data
I/O
Data
I/O
LabelA_2
LabelB_2
"_No." is added to the label.
Data
Data
Line feed according to line feed input
Line feed according to line feed input
Line feed according to line feed input
Line feed according to line feed input
Line feed according to line feed input
Setting the Logging Conditions
Description
LabelG
LabelH
LabelI
LabelJ
Data
Data
Data
Data
LabelJ
Data
I/O
Section3
Line feed
Line feed
Line feed
Line feed
Line feed
Line feed
Line feed
Line feed
Line feed
Line feed
ZS-DSU
3-29
User's Manual
Advertisement
Table of Contents
